3 Trap 140 Body Grippers Trapping Mink Marten Mechanism of "circular" response

Description

Trap KPN-140 is designed for the trapping of sable, marten, mink, polecat, muskrat, and any other animals with body size, which allows to pass through the frame.
The framework, passing, pushing against the trap KPN-140, this new generation of traps for animals. The main difference of this model from other anadromous pitfalls in its system of operation. Trapped KPN-140 all four frame move independently from each other. If the two half-frames get a branch or something else that would prevent complete closing, the second two semi-frame will be closed down completely and killed the beast. Therefore, it can be recommended to put in ponds, where a lot of floating logs and branches, which can impede the actuation of this oppressive trap. During the operation frame of the trap is formed by two flexibly-connected seizure, acting on a common spring, and deal a severe blow to the body production at the same time in any two places, for example in the neck and stomach.
The mechanism of "circular" actions
is done with the
unloading lever
in the ratio of 1:3, which allows to increase the sensitivity of the trap 3 times!!! Therefore, the force required for triggering the alarming mechanism is roughly 30 grams. This allows you to catch the sensitive and gentle animal.
Frame trap connected to each other by using the rivets with a clearance that ensures reliability and ease of operation.
Only this trap KPN-140 can be set as "trace", since all four semi-frame independent.
You order 3 trap.
FEATURES:
The size of the passage /140х140 mm
Type alarming mechanism/ the mechanism of "circular" actions
The diameter of the rod of the frame/2,5x15 mm
Material spring Steel 65G
Diameter spring wire/5.0 mm
The force of the spring/19,0 ± 0,4 kg
Weight/0.6 kg
The cocking of the trap:
1. Turn both springs so that they were outside of the framework of the trap. Compress the spring by hand or with a hook, pincer and clamp with safety hook. Do the same with another spring.
2. Slide the compressed and fastened on the hooks of the spring to the axis of rotation of the trap.
3. Spread the frame out to the sides and bring the trap in the cocked position, overcoming the spring force.
5. Hook the ends of the alarming mechanism circular steps for the opposite frame.
6. Secure the trap in place, then gently remove both the safety hook and take them out to the sides, the turns of the springs.
7. Now the trap is ready for operation.
ATTENTION! TURNING HEADS-UP TRAP, ENSURE THAT THE SAFETY HOOKS FELL OFF OF THE SPRINGS. THE TRAP WITH THE RELEASE SPRINGS ARE DANGEROUS!
PRECAUTIONS:
Examine the principle of operation of the trap. The trap has a tight spring. Lock them in a compressed position by hooks, frames ticking trap secure a safety pin. Do not place your hand in the area of arcs. To check the operation of the trap do not use your hands! Use a stick rod. Do not leave a charged traps in areas accessible to children and Pets! Do not remove the safety bracket and hooks as long as you do not install the trap and will not make any changes in its production.
Please, note that shipping time varies! From Russia to the Canada the mail usually arrives between 10 days to 10 weeks. From Russia to Europe the mail usually arrives between 10 days to 8 weeks. I will only ship to the authorized shipping address that's on your eBay or Paypal account. Enjoy! Buyer pays all shipping and customs fees.  I send your items from up to 5 days after your payment by  registered parcel only(track number).   Thanks!
Due to the epidemic in the world, goods may be delivered with a delay.